示意图应用难点
先明确设备问题和使用条件。
材料筛选前，请确认设备、基材、失效机理、运行环境和维护限制。
用于电气柜内部和绝缘部件的疏水表面处理，适应潮湿及温度循环环境。
Condensation depends on temperature, humidity, ventilation and thermal bridges rather than humidity alone.
The coating location must be selected around live components, clearances, access and maintenance.
A surface treatment complements enclosure, sealing, drainage, ventilation and heating controls; it does not replace them.
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
材料与应用路线
建议验证方法
在相同条件下比较处理样与对照样，并记录材料参数、施工工艺和设备表现。
DSAN-S2001-(II) changes how condensed water wets a treated surface; it does not stop condensation from forming. Review the cabinet design, substrate, voltage environment and existing moisture controls before application.
| 参数 | 作用 | 数值 |
|---|---|---|
| Cabinet temperature and relative-humidity cycle | Establishes when and where condensation forms. | Project input required. |
| Surface and component compatibility | Confirms the permitted coating area and preparation method. | Project input required. |
| Water contact angle | Initial indicator of water repellency on the prepared coating surface. | >150° reference target; confirm the test method and prepared substrate for the project. |
| Roll-off angle | Initial indicator of droplet mobility on the prepared coating surface. | <5° reference target; confirm droplet volume and prepared substrate for the project. |
| Humidity-cycle durability | Checks retained coating condition under the defined cabinet environment. | Project input required. |
典型设备与表面
- Switchgear cabinets
- Ring main units
- Outdoor electrical kiosks
- Control and distribution cabinets
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
需要确认的问题
项目启动前需要确认的问题
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
Where does condensation first appear?
Provide photographs or a cabinet layout showing affected surfaces, components, seals, vents and thermal bridges.
What temperature and humidity cycle occurs?
Record internal and external temperature, relative humidity, duty cycle and any heater or ventilation operation.
Which surfaces may be coated safely?
The equipment owner must identify permitted substrates, clearances, outage requirements and application controls.
相关案例与应用参考
查看相近设备上的公开应用记录。
相关行业洞察
材料选型与工况评估指南。
与我们沟通
与 DSAN NEW MATERIALS 讨论该材料。
用于电气柜内部和绝缘部件的疏水表面处理，适应潮湿及温度循环环境。