示意图应用难点
先明确设备问题和使用条件。
材料筛选前，请确认设备、基材、失效机理、运行环境和维护限制。
用于陶瓷和玻璃绝缘件的表面保护，适应污染、潮湿及户外气候环境。
Contamination type and severity vary by site and season.
Existing surface condition and cleaning method affect coating adhesion and uniformity.
Initial hydrophobicity must be considered together with ageing and field inspection.
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
材料与应用路线
建议验证方法
在相同条件下比较处理样与对照样，并记录材料参数、施工工艺和设备表现。
DSAN-S2001-(I) is intended for ceramic and glass insulation. Final use depends on the insulator, contamination environment, surface preparation and application controls.
| 参数 | 作用 | 数值 |
|---|---|---|
| Water contact angle | Initial indicator of water repellency on the prepared coating surface. | >150° reference target; confirm the test method and prepared substrate for the project. |
| Roll-off angle | Initial indicator of droplet mobility on the prepared coating surface. | <5° reference target; confirm droplet volume and prepared substrate for the project. |
| Insulator substrate and surface condition | Defines preparation, primer and adhesion requirements. | Project input required. |
| Contamination and wetting condition | Aligns laboratory comparison with the service environment. | Project input required. |
| Ageing and inspection plan | Defines how retained surface function and coating condition will be checked. | Project input required. |
典型设备与表面
- Line insulators
- Substation insulators
- Bushings
- Outdoor ceramic and glass insulation interfaces
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
需要确认的问题
项目启动前需要确认的问题
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
What insulator material and voltage environment are involved?
Identify the ceramic or glass substrate, equipment type, voltage class and whether work requires an outage.
What contamination and moisture conditions occur at the site?
Describe salt, dust, industrial deposits, fog, rain, humidity and the existing cleaning interval.
What should be evaluated?
List the intended surface, application process, operating exposure and comparison method.
相关行业洞察
材料选型与工况评估指南。
与我们沟通
与 DSAN NEW MATERIALS 讨论该材料。
用于陶瓷和玻璃绝缘件的表面保护，适应污染、潮湿及户外气候环境。