示意图应用难点
先明确设备问题和使用条件。
材料筛选前，请确认设备、基材、失效机理、运行环境和维护限制。
适用于拒水聚合物薄膜的配方开发方案，需综合评估附着力、柔韧性、光学性能和加工条件。
Low-surface-energy films can be difficult to coat consistently.
Very thin substrates can expose cracking, blocking or flexibility problems that are not visible on rigid panels.
Surface function must be tested after the film's real converting and handling process.
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
材料与应用路线
建议验证方法
在相同条件下比较处理样与对照样，并记录材料参数、施工工艺和设备表现。
DSAN NEW MATERIALS functional powders provide a formulation starting point for coating and film-development partners.
| 参数 | 作用 | 数值 |
|---|---|---|
| Film polymer and surface treatment | Defines the substrate chemistry and adhesion requirements. | Project input required. |
| Water contact and roll-off behaviour | Measures the target wetting response on the finished film. | Project input required. |
| Coating weight / dry-film thickness | Controls appearance, flexibility and material use. | Project input required. |
| Flex and winding durability | Checks cracking, delamination or loss of function during handling. | Project input required. |
| Optical and converting properties | Confirms haze, clarity, print, laminate or seal requirements where applicable. | Project input required. |
典型设备与表面
- Protective polymer films
- Packaging and release films
- Optical or display-related films
- Flexible industrial laminates
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
需要确认的问题
项目启动前需要确认的问题
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
Which polymer and surface treatment are used?
Identify the resin, grade, additives and corona, plasma or primer treatment applied before coating.
Which film property has priority?
State whether water repellency, optics, flexibility, printability, sealing or another function controls the decision.
How will the film be processed after coating?
Describe coating, drying, winding, slitting, laminating and storage conditions so the test plan follows the real process.
相关产品
面向具体设备问题的产品。
相关行业洞察
材料选型与工况评估指南。
示意图超疏水表面如何管理水
说明微纳结构、困气状态和表面化学如何影响润湿，以及选材前需要验证哪些条件。
阅读行业洞察 ↗
示意图工业光学窗口：请用真实切削液来测试
机床视觉与观察窗的疏油处理，必须兼顾透光、耐清洗和实际冷却液，不能只靠一滴油的演示判断。
阅读行业洞察 ↗
超疏水与超疏油涂层：先认清油品，再看磨损后的表现
水滴成珠不等于疏油。有效的比较需要明确液体种类、测量液滴能否移动，并在实际磨损后重复检查。
阅读行业洞察 ↗
功能涂层联合开发：从实际零件到小范围试用
新的应用不一定要套进现有产品目录。先讲清部件、问题和可测量的对照，再一起开发材料与施工工艺。
阅读行业洞察 ↗示意图疏水材料与涂层：按基材、接触水的条件和耐久性选型
评估用于聚合物薄膜、户外设备和风机叶片表面的疏水材料时，不应只看接触角。
阅读行业洞察 ↗与我们沟通
与 DSAN NEW MATERIALS 讨论该材料。
适用于拒水聚合物薄膜的配方开发方案，需综合评估附着力、柔韧性、光学性能和加工条件。