应用难点
先明确设备问题和使用条件。
材料筛选前，请确认设备、基材、失效机理、运行环境和维护限制。
用于紧凑型电气柜体的热触发材料，组件布置与效果需按设备验证。
The ignition source, protected volume and airflow vary between cabinet designs.
Patches, tapes, cords, blankets and coatings place the active material in different ways.
A material release time is not the same as an equipment-level extinguishment result.
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
材料与应用路线
建议验证方法
在相同条件下比较处理样与对照样，并记录材料参数、施工工艺和设备表现。
DSAN NEW MATERIALS supplies FK-5-1-12 microcapsules and passive component formats for engineering evaluation. The equipment manufacturer or owner controls protected-zone definition, placement, quantity and finished-equipment validation.
| 参数 | 作用 | 数值 |
|---|---|---|
| Protected volume and ventilation | Defines the enclosure conditions for quantity and placement review. | Project input required. |
| Ignition source and thermal profile | Identifies the relevant activation location and response condition. | Project input required. |
| Component format and dimensions | Matches patch, tape, cord, blanket or coating to available space. | Current DSAN NEW MATERIALS format data is shown on the related product page; cabinet-specific selection is required. |
| Agent release time | Describes material release under the stated test condition; it is not an extinguishment-time claim. | ≤3 s in current DSAN NEW MATERIALS component documentation; format-specific trigger and test condition apply. |
| Finished-equipment performance | Confirms fire, electrical, ageing, mechanical and applicable compliance requirements. | Project input required. |
典型设备与表面
- Control cabinets
- Distribution cabinets
- Wind-turbine nacelle and tower-base cabinets
- Battery, UPS and power-electronic enclosures
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
需要确认的问题
项目启动前需要确认的问题
为避免改变技术含义，尚无经审校译文的参数名称、项目事实和原始证据暂以英文源文本显示。
Which cabinet zone is being protected?
Provide the enclosure volume, internal layout, ventilation openings, ignition sources and available mounting positions.
Which fire scenario and acceptance method apply?
Define the representative fault, fuel, energization state, detection arrangement and equipment-level test criteria.
Which integration limits must be checked?
Confirm electrical clearances, attachment, ageing, material compatibility, maintenance access and applicable regulatory requirements.
相关案例与应用参考
查看相近设备上的公开应用记录。
与我们沟通
与 DSAN NEW MATERIALS 讨论该材料。
用于紧凑型电气柜体的热触发材料，组件布置与效果需按设备验证。