Application reference · Power grid
500 kV Nanhai Substation Reactor Anti-Pollution Coating Application
Published project record for a hydrophobic surface coating applied to reactor equipment at a 500 kV substation in Liaoning.
Reference imageThe challenge
What the equipment needed to address.
Outdoor insulation and equipment surfaces exposed to water and deposited contamination.
Material and application
How the material was applied or evaluated.
Hydrophobic anti-pollution surface coating
The original record states that the coating was applied to reactor equipment surfaces exposed to outdoor moisture and deposited contamination.
Published information
What supports this project record.
The linked original project record identifies the site, equipment and material used or proposed for the application.
Limitations
Scope and boundaries.
- Application parameters depend on the equipment, substrate and operating conditions.
- Coating area, process controls and acceptance requirements are determined for each project.
- The published record does not by itself establish performance for another project.
Disclosure
Public information scope.
DSAN NEW MATERIALS can compare material requirements and equipment conditions for a similar application.
Related products
Review the material used or considered in this reference.
Discuss a similar application
Tell us what is similar and what is different.
Include the equipment, substrate, exposure, scale and current problem.