Enclosure Condensation Control
DSAN-S2001-(II) Anti-Condensation Coating
Thin hydrophobic coating for condensation-prone electrical enclosures and insulating components.
Product overview
What it is and where it fits.
DSAN-S2001-(II) creates a water-repellent surface intended to reduce persistent water films on treated equipment. It does not stop condensation from forming and should be used with appropriate enclosure, ventilation and insulation controls.
Selection starts with the substrate, equipment, operating environment and intended application process.
Key technical data
Key performance data for product evaluation and material selection.
| Property | Value | Condition | Standard / source |
|---|---|---|---|
| Water contact angle | >150° | Initial prepared coating surface | Published product information |
| Roll-off angle | <5° | Initial prepared coating surface | Published product information |
| Surface dry | 30 min | Condition not stated in the source document. | Published product information |
| Recommended film thickness | 20–40 μm | adjust to the application | Published product information |
| Theoretical spreading rate | 4–5 m²/kg | Calculated value; excludes application loss | Published product information |
| Artificial ageing | 3000 h | Reported as passed; test standard not stated. | Published product information |
| Salt-spray exposure | 1000 h | Reported as passed; test standard not stated. | Published product information |
Technical note: Values are presented with the stated conditions where available. Discuss the intended substrate and operating environment before product selection.
Applications
Typical equipment and surfaces.
Use this list to identify the closest equipment, surface and operating condition.
- 01Ring main units
- 02Switchgear cabinets
- 03Outdoor kiosks
- 04External insulation interfaces
Related applications
Start from a comparable equipment or surface problem.
Related references
See the product in a comparable equipment context.
Illustrative visualPower distributionApplication reference · Hydrophobic surface
Switchgear & Cabinet Interior Moisture Control
- Challenge
- Condensation and surface moisture
- Material
- DSAN-S2001-(II) Anti-Condensation Coating
Reference imagePower distributionApplication reference · Hydrophobic surface
Huai’an 10 kV Ring-Main Unit Anti-Condensation Coating Application
- Challenge
- Condensation and surface moisture inside enclosed distribution equipment.
- Material
- Low-wetting surface coating for condensation-prone equipment
Technical information
Published information for an initial product discussion.
Review the available product information, application context and related research before discussing technical fit.
- Product information
- Application-method reference
- Surface wetting data
- Ageing and salt-spray references
Related products
Other relevant material options.
Anti-Flashover Coating
Primer-and-topcoat hydrophobic protection for ceramic and glass insulation exposed to pollution and moisture.
View product
Electrical Insulation Coating
High-build insulating coating for component-specific applications under the equipment's electrical design authority.
View productProduct enquiry
Discuss DSAN-S2001-(II) Anti-Condensation Coating.
Tell us the application, substrate, operating environment, development goal or market opportunity.